Product ID:COLLOIDAL LEAD AZIDE
MSDS Date:01/01/1987
FSC:6850
NIIN:00F005725
MSDS Number: BBTCJ

E.I. DU PONT DE NEMOURS/WILMINGTON, DE 19898

Emergency Phone: (800) 441-3637

Cage: 18773

E.I. DUPONT DE NEMOURS & CO

WILMINGTON, DE 19898 US

Telephone: 800-441-7515;800-441-9442

Cage: 18873

LEAD AZIDE

RTECS: OF8670000

ACGIH TLV: 0.15 MG/CUM

ETHYL ALCOHOL (ETHANOL)

CAS: 64-17-5

RTECS: KQ6300000

OSHA PEL 1000 PPM

ACGIH TLV: 1000 PPM; 9192

METHYL ALCOHOL (METHANOL) (SARA III)

CAS: 67-56-1

RTECS: PC1400000

OSHA PEL S,200PPM/250STEL

ACGIH TLV: S,200PPM/250STEL; 93

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

Effects of Overexposure:SKIN/EYES, NOSE OR THROAT
IRRITATION/DERMATITIS/DIZZINESS/HEADACHE/NAUSEA & LIVER DAMAGE.

First Aid:INHALATION: REMOVE TO FRESH AIR. BREATHING DIFFICULTIES, GIVE
OXYGEN. CALL PHYS. SKIN: FLUSH W/WATER. EYES: FLUSH W/WATER FOR 15
MINS. CALL PHYSICIAN. INGESTION: INDUCE VOMITING. GIVE 2 GLASSES OF
WAT ER. NEVER GIVE ANYTHING BY MOUTH IF UNCONSCIOUS.

Extinguishing Media:DON'T FIGHT FIRE.
Fire Fighting Procedures:ISOLATE AREA. EVACUATE PERSONNEL TO A SAFE
AREA.
Unusual Fire/Explosion Hazard:GASES PRODUCED IN FIRE ARE LEAD FUMES.
DETONATES W/FRICTION, IMPACT, LOW LEVEL ELECTRICAL CURRENT.

Spill Release Procedures:USE APPROPRIATE PERSONAL PROTECTIVE EQUIPMENT.
CONTROL ACCESS TO AREA & REMOVE SOURC OF FRICTION, IMPACT, HEAT,
LOW LEVEL ELECTRICAL CURRENT, ELECTROSTATIC RF ENERGY.

Handling and Storage Precautions:AS SHIPPED, THESE PRODUCTS ARE WET
WITH AQUEOUS ETHANOL DENATURED WITH METHANOL. THE MIXTURES VE NOT
BEEN TESTED FOR TOXICITY.
Other Precautions:AVOID BREATHING VAPORS OR MIST & EYE/SKIN CONTACT.
AVOID CONTACT W/CLOTHING & BREATHING DUST. WASH THOROUGHLY AFTER
HANDLINGWASH CLOTHING AFTER USE & AVOID BREATHING DETONATION FUMES.

Respiratory Protection:ORGANIC VAPOR CARTRIDGE RESPIRATOR IF EXPOSURE
TO ALCOHOL FUMES.
Protective Gloves:NEOPRENE
Eye Protection:SAFETY GLASSES
Other Protective Equipment:COTTON COVERALLS, CONDUCTIVE SOLED
SHOES/FLOOR, COTTON SOCKS
Supplemental Safety and Health
MSDS DATE: 02/11/85.

Appearance and Odor:WHITE CRYSTALLINE, ODORLESS.

Stability Indicator/Materials to Avoid:YES
ACIDS, OXIDANTS, CO, BRONZE ALLOYS, AG, HG, CD, NI
Stability Condition to Avoid:DETONATES W/FRICTION, IMPACT, GRINDING
ACTION & HEAT.
Hazardous Decomposition Products:LEAD FUMES & HYDRAZOIC ACID FROM
REACTION WITH ACIDS.
Conditions to Avoid Polymerization:DETONATES WHEN EXPOSED TO HEAT OR
FLAME.

Waste Disposal Methods:CONSULT AN EXPLOSIVE MFG FOR RECOMMENDED METHODS
OF DESTROYING EXPLOSIVE MATERIALS. COMPLY W/APPLICABLE FEDERAL
REGULATIONS UNDER THE AUTHORITY OF THE RESOURCE CONSERVATION &
RECOVERY ACT. DON'T FLUSH TO SURFACE WATER OR SANITARY SEWER
SYSTEM.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.